Beverage buckle & Burst
Analog-based gauges are no longer sufficient in today's competitive environment. These gauges won't show you the graph nor accurately analyze the data. If you want to record and analyze the data, you need to write down each measurement and enter the data manually in to an SPC program.
Quality By Vision's new Beverage Buckle & Burst Gauge is an accurate, user friendly and affordable system that automatically measures and records all pressure points on beverage can body and end. The system has the ability to measure one set of beverage can body and beverage end.
The system displays the pressure graphs and allow the operator to see the exact point where the dome reverses (buckle) and bursts - automatic detection determines the exact point of buckle and burst.
The software provides easy to read information on the can and records the data in the built-in Symphony SPC system. There is no operator influence on the measurement process and the pressure test scenario (when to raise pressure, by how much, how long to hold, etc.) is completely programmable.
The system is modular and can measure 2, 4 or 6 ends or finished cans (after necking and flange) or any combination of ends and cans.
- Modular system - basic system can measure 2 ends/cans and it can be extended to measure 4 and even 6 ends/cans.
- User changeable between cans and ends.
- Automatic detection of the Buckle/Burst points.
- Automatic reporting and archiving?of all information.?
- Free SPC system included.
- Network support (see more information here).
- Profile of test is fully configurable, i.e at what pressure rate to ramp, hold pressure and hold time, etc.
- Operates on regular air pressure (6 bar).
- Can test pressures?up to 10 bars.
- One measure cell with two measurement position.
- Can/Ends type: Aluminum one diameter.
- Number of positions for cans on ends:2.
- Pressure range: 1-10 Bar.
- Resolution: 0.01 Bar.
- Air pressure required: 6 Bar with 100 liter per min.
- Programmable mode of operation.
- Cycle time: up to 60 seconds. (Programmable).
- Graph of pressure displayed during process.
- Saves and prints graphs and report.
- Control unit + one set for measuring two items.
- Built in monitor.
